Digital Torque Wrench / Tester with 1/2" drive

  Model DSW-120

• Ergonomic, light weight, rugged metal construction
• Wrench head swivels 300°
• Available in lbf-in, lbf-ft, Kgf-cm and N-m (specify when ordering)
• Peak, Real Time, Peak Down and Continuous Output measuring modes (selectable)
• Accuracy: ±0.5% F.S. ±1 LSD
• 300 data memory for recall or for SPC download
• Programmable High and Low setpoints with both audible beep and
• Green/ Red LED indicator for uniform torque tightening or GO/NO GO testing
• Both CW and CCW operation
• RS-232C output for SPC capability
• Runs on internal NiCad batteries (8 hour use)
• DSW-120 is sold as a kit including carrying case and AC adapter/charger
  (Optional CW one-way clutch is available).

DSW-120 lightweight digital torque wrench tightens or loosens bolts up to 1040 lbf-in. The wrench head swivels 300° and can be used in tight places.

You’ll get consistent readings no matter where or how the wrench is gripped because the torque sensor is centered on the drive and not up in the handle. Torque controlled wrenches can also be evaluated by comparative tests on a given fastener. Both breakaway and loosen tests can be performed. Rugged enough to be used in production.

This tester has an accuracy of ±0.5%, ± 1 LSD and offers a programmable setpoint for uniform tightening or Go/No Go testing. Peak and continuous data can be downloaded via the RS232 port. Click here for torque tester data acquisition software.