Rotating Torque Tester
Model NTS-6
|
|
|
 |
- Available in: lbf-in, ozf-in, Kgf-cm, N-cm and N-m (specify
units when ordering)
- Peak, Real Time and Continuous Output measuring modes
(selectable)
- RS-232C output n Both CW and CCW operation
- Programmable high/low setpoints for Go/No go testing
|
|
NTS-6 is a motorized rotating torque tester that measures
rotating dynamic torque while turning test pieces. Check the
rotating torque, smoothness of rotation and components of small
precision motors, such as, gearbox, bearings, oil seals, etc. Torque
data can be continuously output via RS-232 enabling you to display a
torque profile using data acquisition software. Click here for
torque
tester data acquisition software.
NTS-6 Specifications |
|
S1
|
S2
|
S5
|
Measuring range
(at the time of Track)
|
3.0~100mNm
|
3.0~200mNm
|
0.030~0.5Nm
|
Max. Rotational Speed (no-load)
|
85rpm
|
30rpm
|
13rpm
|
Display
|
4 digit LCD display
|
Operation
|
Both CW and CCW motorized rotation
|
Measuring modes
|
PP: Peak Mode displays PEAK torque value that will not
change until a higher value is measured.
GO: Real Time Mode displays TRANSIENT torque values.
RG: Output Torque Data every 1/100 seconds.
|
Measurement start time
|
Can be set up to 1 second in 0.1 second increments.
|
Measuring time
|
Time can be programmed between 1 and 20 seconds.
|
Go/No go testing
|
Programmable High and Low values; Green lamp (OK solid,
NG blinking).
|
External input/output
|
Signal output (open collector): Go and No Go
Data output: RS-232C (9600 baud) External start switch input
|
Data memory
|
400 data
|
Power supply
|
AC100V~240V
|
Bit size
|
4mm diameter
|
Dimensions (indicator)
|
165mm W × 110mm D × 58mm H
|
Dimensions (detector)
|
28mm dia. × 155mm
|
37mm dia. × 195mm
|
NTS-6 Ranges
Accuracy: ±1% F.S., 1LSD |
Model
|
Capacity
|
NTS-S1
|
14.00 ozf-in
|
NTS-S2
|
28.00 ozf-in
|
NTS-S5
|
70.00 ozf-in
|
|